Rsd 0177-2005-SMB Clarity Cam Cover - Black Ops

This cover has a thinner design with smaller windows for additional exhaust clearance; will fit 01-14 Twin Cam models where this is needed.

Allows for viewing of the internal moving engine components. CNC-machined from billet aluminum. Hardware included. Contrast Cut finish starts with a polished top cover that has been black anodized, then recut to open up the design. Black Ops features gloss black on top of contrasting textured black for outstanding durability and good looks. Matching Clarity air cleaner and derby cover available. Made in the USA. The RSD Clarity Cam Covers contain two pre-installed Lexan polycarbonate windows. These windows are very resistant to almost everything a motorcycle will be exposed to. However, extra care and preparation must be taken when installing the cam cover near the exhaust system. The Lexan polycarbonate windows must be at least 5/16in. away from the exhaust pipe to insure the temperature does not exceed the capabilities of the Lexan. Additional clearance is recommended to preserve the optical clarity of the Lexan window as well as reducing the amount of heat introduced to the engine from the exhaust. Take measurements when installing the exhaust system and make sure that the exhaust NEVER contacts the Lexan windows, bolts or the aluminum cam cover. Lexan is very durable but it must be treated just like any plastic and cannot come into contact with the exhaust pipes. The Lexan windows, just like any plastic, will melt if in direct contact with the exhaust pipe. If the Lexan windows have less than adequate clearance premature discoloration, cracking or melting may occur causing severe failure and/or possible injury to the rider. RSD recommends the use of high pipes or exhaust that runs above the cam cover which eliminates any potential exhaust contact. TECHNICAL GUIDELINES FOR CLARITY CAM COVER:. 1. There must be at least 5/16in. between the exhaust and the Lexan windows, bolts and cover. 2. Absolutely no contact between the Lexan windows, bolts or alminum cam cover. 3. Do not use brake cleaner, acetone or any harsh chemicals during installation. 4. Use Plexus cleaner for cleaning. If any other cleaners are used, read the.

Vehicle Fitment:

2002-2017 Harley Davidson FLHR Road King
2007-2013 Harley Davidson FLHRC Road King Classic
2002-2006 Harley Davidson FLHRCI Road King Classic
2002-2006 Harley Davidson FLHRI Road King
2004-2007 Harley Davidson FLHRS Road King Custom
2004-2006 Harley Davidson FLHRSI Road King Custom
2017 Harley Davidson FLHRXS Road King Special
2002-2009 Harley Davidson FLHT Electra Glide Standard
2002-2005 Harley Davidson FLHTC Electra Glide Classic
2007-2013 Harley Davidson FLHTC Electra Glide Classic
2002-2006 Harley Davidson FLHTCI Electra Glide Classic
2007-2017 Harley Davidson FLHTCU Electra Glide Ultra Classic
2002-2006 Harley Davidson FLHTCUI Electra Glide Ultra Classic
2015-2016 Harley Davidson FLHTCUL Electra Glide Ultra Classic Low
2014-2017 Harley Davidson FLHTCUTG Tri Glide Ultra
2009-2013 Harley Davidson FLHTCUTG Tri Glide Ultra Classic
2003-2006 Harley Davidson FLHTI Electra Glide Standard
2010-2014 Harley Davidson FLHTK Electra Glide Ultra Limited
2015-2017 Harley Davidson FLHTK Ultra Limited
2015-2017 Harley Davidson FLHTKL Ultra Limited Low
2006-2017 Harley Davidson FLHX Street Glide
2006 Harley Davidson FLHXI Street Glide
2014-2017 Harley Davidson FLHXS Street Glide Special
2010-2011 Harley Davidson FLHXXX Street Glide Trike
2002 Harley Davidson FLTR Road Glide
2007-2009 Harley Davidson FLTR Road Glide
2002-2006 Harley Davidson FLTRI Road Glide
2011-2013 Harley Davidson FLTRU Road Glide Ultra
2016-2017 Harley Davidson FLTRU Road Glide Ultra
2015-2017 Harley Davidson FLTRX Road Glide
2010-2013 Harley Davidson FLTRX Road Glide Custom
2015-2017 Harley Davidson FLTRXS Road Glide Special