RockJocks completely bolt-on Currectlync Drag Link for JK Wrangler and JK Wrangler Unlimited vehicles is an organically shaped chromoly forging with a deep dip in the middle of the bar that allows ...
RockJocks completely bolt-on Currectlync Steering System for JK Wrangler and JK Wrangler Unlimited vehicles features our flipped drag link that mounts to the top of the steering arm, instead of und...
RockJocks front coil spring shim for JL Wrangler and JT Gladiator is 3/16 in. thick and mounts between the welded on coil spring axle pad and the coil spring isolator. The indexing pin in the coil ...
RockJocks rear coil spring shim for JL Wrangler is 3/16 in. thick and mounts between the welded on coil spring axle pad and the coil spring isolator. These shims are used to fine tune vehicle heigh...
RockJocks front brake flex hose relocation bracket kit out of their JL Wrangler and JT Gladiator Suspension Kits. Brackets allow the stock brake hoses to be removed from the vehicle, bolted to thes...
This pair of RockJock front coil springs will provide 3 1/2 inches of lift in JL Wrangler Unlimited applications that feature the 3.6L V6 or 2.0T I4 powertrains. These springs directly replace fact...
This pair of RockJock rear coil springs will provide 3 1/2 inches of lift in JL Wrangler Unlimited applications that feature the 3.6L V6 or 2.0T I4 powertrains. These springs directly replace facto...
In a lifted JT Gladiator application, it is necessary to lower the driveshaft carrier bearing to reduce driveline angles. This beautifully machined, billet aluminum spacer from RockJock fits betwee...
RockJocks JT Rear Suspension Geometry Correction Brackets relocate the axle housing mounting point of the rear upper control arms to reduce the dramatic pinion angle drop associated with the JT rea...
RockJocks Geometry Correction Axle Bracket Kit for the rear Trac Bar of 2021-up Broncos is a highly recommended upgrade for lifted vehicles to relocate the axle housing mounting point of the rear t...
RockJocks Johnny Joint adjustable rear trac bar for 2021-up Bronco features precise bends for a perfect fit into stock or lifted vehicles as well as vehicles with larger, aftermarket differentials....
RockJocks Pre-Runner Chromoly Double Sheer End Link Bracket Kit is used in conjunction with their 35 spline Pre-Runner Antirock Sway Bar Arms. These arms bolt to 3 holes on the end of our Pre-Runne...
RockJock offers forged chromoly arms for Antirock sway bar kits as an upgrade to existing vehicles or for those looking for maximum strength for their rock crawling rig! These arms provide maximum ...
RockJocks fabricated steel Antirock sway bar arms feature an offset bend for addressing component clearance issues. These arems are 19.25 in. long overall, making them 17.95 in. from center of spli...
RockJocks Adjustable Sway Bar End Link Set features 8 1/2 in. long link rods and their high-end sealed rod ends. The rods feature 2 5/8 in. of 1/2 in.-20 LH thread and 2 5/8 in. of 1/2 in.-20 RH th...
Overlanders and Racers! If you've been in need of a heavier front sway bar to support the added load, and resulting sway) of the addition of a rack, a roof top tent, camping gear, etc. – or – if yo...
RockJocks Antirock sway bar kits are available in a universal fit configuration for those building their own custom rigs and rock buggies. This universal kit features a 36 in. torsion bar length an...
RockJocks Antirock Sway Bar Bushing for the heavier, 28 spline bars features a 1.213 in. I.D., a 1.572 in., press area) O.D. and a 1.750 in. O.D. flange. CNC machined from UHMW material.
