
High Lifter Products
High Lifter Products PLK800R-50 Signature Series Lift Kit - 3in. Lift
Generally ships to addresses in the contiguous United States the same business day if ordered by 12:15PM Central Time!
Bigger. Badder. BOLDER. Take your ATV to the edge with High Lifters Signature Series Lift Kit. Increase your ground clearance and make room for larger tires to dig deep and ride hard in most any terrain. High Lifer engineers and staff have spent over 20 years perfecting the ultimate ATV lift kit. The product? The Signature Series Lift Kit is even easier to install with a bolt-on application that consistently measures truer over competitor products..
All hardware needed for successful installation..
An easy-to-install, bolt-on lift that consistently measures truer over competitor products..
Proudly made in the USA!.
High Lifters Pro Series Alignment Kit (PSAK-1) is REQUIRED if you own or are buying PLK800R-50 or ANY brand of Ranger lift kit and have upgraded or are upgrading to the Pro Series Ranger Tie Rod/Rack End Kit..
This kit also upgrades from the OEM 10mm bolt to a 1/2in. Gr. 8 bolt to match the heavy duty heim joint in our Tie Rod/Rack End Kit. The alignment kit comes with 2 alignment cones and all hardware required to upgrade both sides of the Ranger..
High Lifters Steering Stops (RANGER-SSK) are a must-have for Ranger Lift Kit owners. The Steering Stops helps reduce the turn radius and can help prevent breaking an axle..
Tire Fitment: Polaris 800 EFI Ranger XP, HD IRS - Up to 28in. and Polaris 800 Ranger Crew IRS - Up to 28in..
Stated tire fitment guide is a general fitment and is in no way guaranteed. Tires and lifts vary by manufacture and tire fitment can be affected by other modifications. Always verify your brand of tires, lift, and other modifications prior to making a buying decision..
NOTES:.
1.5in. spacers are recommended, but a MINIMUM of a 1in. wheel spacer is required on the front if you are running 12in. diameter factory or aftermarket wheels for the wheel to clear the tie rod with the alignment cones installed. If you are running wide tires a 1.5in. or wider spacer may be required depending on the width of the tire for tire to shock clearance at full lock steering..
New Rear High Lifter Outlaw DHT Axles or heavy duty after market axles are recommended for the 2011-2014 Ranger models before installing ANY brand of lift kit. The 2011-2014 model rangers have lighter duty rear axles than previous year models and are more prone to breakage..
High Lifters Pro Series Alignment Kit (PSAK-1) is REQUIREDif you own or are buying PLK800R-50 or ANY brand of Ranger lift kit and have updgraded or are upgrading to the Pro Series Ranger Tie Rod/Rack End Kit. This kit also upgrades from the OEM 10mm bolt to a 1/2in. Gr. 8 bolt to match the heavy duty heim joint in our Tie Rod/Rack End Kit. The alignment kit comes with 2 alignment cones and all hardwared required to upgrade both sides of the Ranger.
Polaris Ranger 800 Crew 2010-2014
Polaris Ranger 800 EFI 2013-2014
Polaris Ranger 800 HD 2010
Polaris Ranger 800 HD EPS 2011-2012
Polaris Ranger 800 XP 2010-2012
Polaris Ranger 800 XP EPS 2011-2012
Polaris Ranger HD 700 2009
Polaris Ranger XP 700 2009
Bigger. Badder. BOLDER. Take your ATV to the edge with High Lifters Signature Series Lift Kit. Increase your ground clearance and make room for larger tires to dig deep and ride hard in most any terrain. High Lifer engineers and staff have spent over 20 years perfecting the ultimate ATV lift kit. The product? The Signature Series Lift Kit is even easier to install with a bolt-on application that consistently measures truer over competitor products..
All hardware needed for successful installation..
An easy-to-install, bolt-on lift that consistently measures truer over competitor products..
Proudly made in the USA!.
High Lifters Pro Series Alignment Kit (PSAK-1) is REQUIRED if you own or are buying PLK800R-50 or ANY brand of Ranger lift kit and have upgraded or are upgrading to the Pro Series Ranger Tie Rod/Rack End Kit..
This kit also upgrades from the OEM 10mm bolt to a 1/2in. Gr. 8 bolt to match the heavy duty heim joint in our Tie Rod/Rack End Kit. The alignment kit comes with 2 alignment cones and all hardware required to upgrade both sides of the Ranger..
High Lifters Steering Stops (RANGER-SSK) are a must-have for Ranger Lift Kit owners. The Steering Stops helps reduce the turn radius and can help prevent breaking an axle..
Tire Fitment: Polaris 800 EFI Ranger XP, HD IRS - Up to 28in. and Polaris 800 Ranger Crew IRS - Up to 28in..
Stated tire fitment guide is a general fitment and is in no way guaranteed. Tires and lifts vary by manufacture and tire fitment can be affected by other modifications. Always verify your brand of tires, lift, and other modifications prior to making a buying decision..
NOTES:.
1.5in. spacers are recommended, but a MINIMUM of a 1in. wheel spacer is required on the front if you are running 12in. diameter factory or aftermarket wheels for the wheel to clear the tie rod with the alignment cones installed. If you are running wide tires a 1.5in. or wider spacer may be required depending on the width of the tire for tire to shock clearance at full lock steering..
New Rear High Lifter Outlaw DHT Axles or heavy duty after market axles are recommended for the 2011-2014 Ranger models before installing ANY brand of lift kit. The 2011-2014 model rangers have lighter duty rear axles than previous year models and are more prone to breakage..
High Lifters Pro Series Alignment Kit (PSAK-1) is REQUIREDif you own or are buying PLK800R-50 or ANY brand of Ranger lift kit and have updgraded or are upgrading to the Pro Series Ranger Tie Rod/Rack End Kit. This kit also upgrades from the OEM 10mm bolt to a 1/2in. Gr. 8 bolt to match the heavy duty heim joint in our Tie Rod/Rack End Kit. The alignment kit comes with 2 alignment cones and all hardwared required to upgrade both sides of the Ranger.
Polaris Ranger 800 Crew 2010-2014
Polaris Ranger 800 EFI 2013-2014
Polaris Ranger 800 HD 2010
Polaris Ranger 800 HD EPS 2011-2012
Polaris Ranger 800 XP 2010-2012
Polaris Ranger 800 XP EPS 2011-2012
Polaris Ranger HD 700 2009
Polaris Ranger XP 700 2009
Please Note: Ships same business day to contiguous US if ordered by 12:15 PM Central Time!
Note: PLK800R-50