My Cart



RSD 0177-2005-SMB Clarity Cam Cover - Black Ops


Generally ships to addresses in the contiguous United States the same business day if ordered by 12:15PM Central Time!

Allows for viewing of the internal moving engine components.
CNC-machined from billet aluminum.
Hardware included.
Contrast Cut finish starts with a polished top cover that has been black anodized, then recut to open up the design.
Black Ops features gloss black on top of contrasting textured black for outstanding durability and good looks.
Matching Clarity air cleaner and derby cover available.
Made in the USA.
The RSD Clarity Cam Covers contain two pre-installed Lexan polycarbonate windows. These windows are very resistant to almost everything a motorcycle will be exposed to. However, extra care and preparation must be taken when installing the cam cover near the exhaust system..
The Lexan polycarbonate windows must be at least 5/16in. away from the exhaust pipe to insure the temperature does not exceed the capabilities of the Lexan. Additional clearance is recommended to preserve the optical clarity of the Lexan window as well as reducing the amount of heat introduced to the engine from the exhaust. Take measurements when installing the exhaust system and make sure that the exhaust NEVER contacts the Lexan windows, bolts or the aluminum cam cover. Lexan is very durable but it must be treated just like any plastic and cannot come into contact with the exhaust pipes. The Lexan windows, just like any plastic, will melt if in direct contact with the exhaust pipe. If the Lexan windows have less than adequate clearance premature discoloration, cracking or melting may occur causing severe failure and/or possible injury to the rider. RSD recommends the use of high pipes or exhaust that runs above the cam cover which eliminates any potential exhaust contact..
1. There must be at least 5/16in. between the exhaust and the Lexan windows, bolts and cover..
2. Absolutely no contact between the Lexan windows, bolts or alminum cam cover..
3. Do not use brake cleaner, acetone or any harsh chemicals during installation..
4. Use Plexus cleaner for cleaning. If any other cleaners are used, read the.
This cover has a thinner design with smaller windows for additional exhaust clearance; will fit 01-14 Twin Cam models where this is needed
Harley Davidson FLHR Road King 2002-2017
Harley Davidson FLHRC Road King Classic 2007-2013
Harley Davidson FLHRCI Road King Classic 2002-2006
Harley Davidson FLHRI Road King 2002-2006
Harley Davidson FLHRS Road King Custom 2004-2007
Harley Davidson FLHRSI Road King Custom 2004-2006
Harley Davidson FLHRXS Road King Special 2017
Harley Davidson FLHT Electra Glide Standard 2002-2009
Harley Davidson FLHTC Electra Glide Classic 2007-2013
Harley Davidson FLHTC Electra Glide Classic 2002-2005
Harley Davidson FLHTCI Electra Glide Classic 2002-2006
Harley Davidson FLHTCU Electra Glide Ultra Classic 2007-2017
Harley Davidson FLHTCUI Electra Glide Ultra Classic 2002-2006
Harley Davidson FLHTCUL Electra Glide Ultra Classic Low 2015-2016
Harley Davidson FLHTCUTG Tri Glide Ultra 2014-2017
Harley Davidson FLHTCUTG Tri Glide Ultra Classic 2009-2013
Harley Davidson FLHTI Electra Glide Standard 2003-2006
Harley Davidson FLHTK Electra Glide Ultra Limited 2010-2014
Harley Davidson FLHTK Ultra Limited 2015-2017
Harley Davidson FLHTKL Ultra Limited Low 2015-2017
Harley Davidson FLHX Street Glide 2006-2017
Harley Davidson FLHXI Street Glide 2006
Harley Davidson FLHXS Street Glide Special 2014-2017
Harley Davidson FLHXXX Street Glide Trike 2010-201

Please Note: Ships same business day to contiguous US if ordered by 12:15 PM Central Time!

Note: 0177-2005-SMB