This kit is what’s required to rebuild the uniballs in your Camburg upper arms and some of our lower arms. The kit includes two FK 1.25 uniballs and two snap rings. These are made in the USA and ar...
Looking to replace the clamps on your Camburg billet upper control arms? This kit comes with two rubber insulated stainless steel clamps and the necessary screws and washers. These can also be used...
Looking to replace the polyurethane bushing pivot washers on your Camburg tubular upper control arms? This kit comes with the necessary zinc plated washers for a pair of arms. These are vehicle spe...
Looking to replace the heim pivot spacers on your Camburg upper control arms? This kit comes with the necessary stainless steel heim spacers for a pair of arms. These are vehicle specific and desig...
Needing to replace our long-travel tie rod extension or wanting a spare? These are machined from heat-treated stainless steel and use the factory inner tie rod and outer tie rod end. They are vehic...
Wanting to link the rear of your truck yourself, but don’t know where to start? These are laser cut and MIG welded and come with 3/4" Grade 8 hardware. You can use these for either 3 or 4 link desi...
These 2.50 spindle snouts are CNC machined in-house from aircraft quality 4130 chromoly. Starting with a billet 4130 bar we machine them to rough dimensions of the final part. We then have them hea...
These 2.50 spindle snouts are CNC machined in-house from aircraft quality 4130 chromoly. Starting with a billet 4130 bar we machine them to rough dimensions of the final part. We then have them hea...
We've been building these bump stop cans for over 20 years. They are often copied and knocked off. We have these CNC laser cut from USA DOM tubing and then weld the pinch bungs on that use 3/8" gra...
When lifting your 10'-14' F-150 SVT Raptor, the stock upper arms become the limiting factor and hold back your suspensions performance. Our Camburg upper arms address these issues and more. Replaci...
Upgrade your leveling kit with our new uniball radius arms for 2005-2022 Ford F-250/350 trucks. These arms improve handling on and off-road, increase ground clearance, and are stronger than stock v...
Our 21'-25' F-150 KINETIK Series billet upper control arms allow for increased wheel travel and articulation out on the trail, corrected suspension geometry with increased caster for improved handl...
When lifting your 21'-25' Bronco, the stock upper arms become the limiting factor and hold back your suspensions performance. Our Camburg upper arms address these issues and more. Replacing the sto...
Our 21'-25' Bronco KINETIK Series billet upper control arms allow for increased wheel travel and articulation out on the trail, corrected suspension geometry with increased caster for improved hand...
Our 21'-25' Bronco KINETIK Series billet upper control arms allow for increased wheel travel and articulation out on the trail, corrected suspension geometry with increased caster for improved hand...
Our Camburg coil spring preload kits are a cost effective and easy way to lift and level the front of your '21-25 Gen3 Ford Raptor while still keeping the plush factory ride with the OEM Fox coilov...
Our 17'-25' F-150 Raptor KINETIK Series billet upper control arms allow for increased wheel travel and articulation out on the trail, corrected suspension geometry with increased caster for improve...
Our 17'-25' F-150 Raptor KINETIK Series billet upper control arms allow for increased wheel travel and articulation out on the trail, corrected suspension geometry with increased caster for improve...
